EVAPORATOR COILS RTPF

Evaporator Coils Round Tube Plate Fin

Heatcraft® Evaporator coils are designed and engineered for efficient operation with all refrigerants. The performance capabilities are excellent for comfort cooling, process cooling, and dehumidification applications. Direct expansion type evaporator coils are engineered and designed to deliver the maximum possible heat transfer efficiency under all operating conditions. The wide variety of standard and custom circuiting options offers the opportunity to provide the best circuit for peak system performance. Counter flow circuitry is applied whenever possible, and all evaporators can be supplied with distributors and equal length distributor tubes to assure proper refrigerant distribution. Circuiting for face, row, or custom control is also available on a wide variety of coils.

Single, dual, or quad compressor circuits allow precise capacity control. Unique interlaced circuiting options assure uniform refrigerant distribution over the entire face area of the coil. Available wide fin spacing reduces the effect of frost build-up on low temperature applications. Evaporators are designed for use in AHU, central systems, or duct applications.
Evaporator Coil Construction Americas EMEA APAC
Tubing 3/8”, 1/2” O.D. Cu & 5/8” O.D. Cu, CuNi, AD
Brass
1/2”, 15mm (P40) O.D. Copper N/A
Circuit Type Single or multiple compressor circuit Upon request N/A
Distribution Control Single, face, row, interlaced, interlaced
& face
1,2,3 stages. 2 stage in height or
interlaced. 3 stages in height
N/A
Rows 2, 3, 4, 5, 6, 8, 10, 12 2, 3, 4, 6 N/A
Fin Surface Sine Wave (corrugated) , New Ripple
(peak and valley) or Flat
Louvered or flat (slightly louvered) N/A
Tube Pattern Various Various
Casing / Mounting Galvanized Steel, Stainless Steel, Carbon
Steel, Copper or Aluminum
Galvanized Steel, Stainless Steel,
AcidProof, AluZink® or Aluminum
N/A
Connections Various Copper N/A
Fin Material Copper, Aluminum, Pre-Coated;
Hydrophilic, Corrosive resistant
Al, Cu, Corropaint (epoxy coated), tinned
copper, hydro paint
Options Side port connection, Electrofin coating,
Ammonia construction
ElectroFin® E-Coating, Heresite® Coatings N/A
Links Evaporator Catalog
Evaporator Coil Installation,
Operation and Maintenance
Evaporation Coil Specification
Certified Drawing Evaporator Coil
VENTILATION HEATEXCHANGER
Tube Patterns
N/A
Evaporator Coil Construction Americas EMEA APAC
Tubing 3/8”, 1/2” O.D. Cu & 5/8” O.D. Cu, CuNi, AD
Brass
1/2”, 15mm (P40) O.D. Copper N/A
Circuit Type Single or multiple compressor circuit Upon request N/A
Distribution Control Single, face, row, interlaced, interlaced
& face
1,2,3 stages. 2 stage in height or
interlaced. 3 stages in height
N/A
Rows 2, 3, 4, 5, 6, 8, 10, 12 2, 3, 4, 6 N/A
Fin Surface Sine Wave (corrugated) , New Ripple
(peak and valley) or Flat
Louvered or flat (slightly louvered) N/A
Tube Pattern Various Various
Casing / Mounting Galvanized Steel, Stainless Steel, Carbon
Steel, Copper or Aluminum
Galvanized Steel, Stainless Steel,
AcidProof, AluZink® or Aluminum
N/A
Connections Various Copper N/A
Fin Material Copper, Aluminum, Pre-Coated;
Hydrophilic, Corrosive resistant
Al, Cu, Corropaint (epoxy coated), tinned
copper, hydro paint
Options Side port connection, Electrofin coating,
Ammonia construction
ElectroFin® E-Coating, Heresite® Coatings N/A
Links Evaporator Catalog
Evaporator Coil Installation,
Operation and Maintenance
Evaporation Coil Specification
Certified Drawing Evaporator Coil
VENTILATION HEATEXCHANGER
Tube Patterns
N/A