EVAPORATOR COILS RTPF
Previous
Next
Micro Channel Evaporator
In our microchannel evaporators, an internal refrigerant distributor is used in combination with vertical microchannel tube orientation and oversized manifolds. This provides optimum thermal performance over a wide range of operating conditions and design issues, ensures uniform refrigerant distribution in the inlet manifold and equal refrigerant injection across all the multiport microchannel tubes, and counteracts the effects of outlet manifold pressure drop. Additionally, vertical tube orientation ensures free condensate runoff.
The new generation microchannel evaporator significantly differs from other types in many ways; its construction includes the following elements:
·Parallel microchannel tubes and fin strips, selected individually as per customer requirements
·Inlet manifold with an integrated refrigerant distributor providing even refrigerant distribution across the microchannel tubes
·Outlet manifold
·Refrigerant inlet and outlet connections
·Reinforcement bars
·Mounting studs
| MAX WIDTH [MM] | 50 … 2000 |
| MAX HEIGHT [MM] | 50 … 2000 |
| TUBE WIDTH [MM] | 12/16/18.8/20/22/25/25.4/32/36/45 |
| MANIFOLD DIAMETER [MM] | 16/17/20/26/28/30/32/35/38/42/50 |
| FIN TYPES | FLAT/LOUVERED |
| FIN PITCHES [FPI] | 10/16/18/19/21/23/24/BY REQUEST |
| DESIGN PRESSURE [BAR] | 32/45 |
| REFRIGERANTS | HFC/HFO/NATURAL |
| PROTECTIVE COATINGS | E-COATING/TCP-COATING |
